On a water cooled condenser? – dontjudgejustfeed.com

GIdxtG8dVI?feature=oembed » frameborder= »0″ allow= »accelerometer; autoplay; clipboard writing; encrypted media; gyroscope; picture-in-picture « allow fullscreen>

39 related questions found

What is the difference between an air-cooled condenser and a water-cooled condenser?

Differences in condensers

Air-cooled chillers have a condenser that uses ambient air to cool hot refrigerant. … tube-in-tube, shell-and-tube or plate heat exchangers in which water from a cooling tower or other water source cools the refrigerant.

Are water-cooled condensers more efficient than air-cooled condensers?

energy efficiency: Water-cooled chiller Often more energy efficient than air-cooled chillers. The refrigerant condensing temperature in an air-cooled chiller depends on the ambient dry bulb temperature.

What happens if the condenser water temperature is too high?

If the temperature is too high, more than 75 degrees, Chillers consume excess energy and increase your monthly energy costs.

What is the function of the water condenser?

A Liebig condenser, sometimes referred to simply as a water condenser, is a glass vessel that Used to condense compounds in the gas phase (gas phase) back into the liquid phase under boiling conditions.

How does a water-cooled condenser work?

A water-cooled condenser is a heat exchanger Removes heat from the refrigerant vapor and transfers it to the water flowing through it. This can be achieved by condensing the refrigerant vapor outside the tubes. During this process, the steam condenses and dissipates heat to the water flowing in the tube.

What are the three functions of the condenser?

Condenser units used in central air conditioning systems usually have a heat exchanger section to cool and condense the incoming refrigerant vapor into a liquid, a compressor to raise the pressure of the refrigerant and move itand a fan to blow outside air through the heat exchanger section to cool the…

How to choose a condenser?

The main factors involved in choosing the right type of condenser depend on whether Condensation is total or partial, whether the vapor is single-component or multi-component, and whether some components are non-condensable. The coolant can impose further restrictions, especially if it evaporates.

What is the principle of the condenser?

The purpose of the condenser is to receive high pressure gas from the compressor and convert this gas into liquid.it passes spread heator the principle that heat is always transferred from a hotter substance to a cooler substance.

What are the disadvantages of air-cooled engines?

What are the disadvantages of air-cooled engines?Air-cooled engine is more prone to overheating. They can also be more expensive to manufacture, and the large fans used to cool the engine consume a lot of power.

What are the advantages and disadvantages of condensers?

water cooled condenser High heat transfer rate. The overall operating cost is low. Water-cooled condensers are used in large capacity plants. It produces less noise.

What happens if the condenser water temperature is too low?

If the inlet water temperature drops too low, Insufficient condenser head pressure to supply refrigerant through expansion valve. Water temperature leaving the condenser: This temperature will vary with heat load and/or tonnage (capacity of the machine).

What causes cold water to flow through the condenser?

Answer: in steam condensation during distillation. To absorb more, cold water is passed through the underside so it stays longer and absorbs more heat from the steam, forming a liquid substance.

Why is the condenser called a condenser?

Capacitors and capacitors are components in a circuit that can store electrical charge. …it’s called a condenser Because it functions like a « mechanical condenser », converting a large amount of steam into a smaller amount of liquid.

What is the use of a condenser in a microscope?

On an upright microscope, the condenser is located below the stage, Used to collect wavefronts from microscope light sources and concentrate them into a light cone that illuminates the specimen with uniform intensity over the entire field of view.

How to clean a water cooled condenser?

warm solution Works best, but don’t heat above warm. Mix warm water and acid according to container instructions (usually 10 parts water to one part acid). The acid mixture was circulated through the condenser for 15-30 minutes. Remember that acids are corrosive, so do not cycle longer than 1 hour.

What is the temperature of the condensed water?

Generally choose cooling tower supply 85°F Water is supplied to the chiller’s condenser at design conditions—that is, when the ambient wet bulb temperature is equal to the design temperature and the chiller is operating at full capacity.

What are the disadvantages of air-cooled condensers?

Disadvantages of air-cooled condensers:

  • Air-cooled condensers require more power to operate.
  • It is not suitable for long-term use.
  • The cooling effect is not that high.
  • It does not provide the required cooling in a short period of time.

Is a cooling tower a condenser?

cooling towers and The condenser is both a heat exchanger device But works in the opposite way. Condensers convert substances from gas to liquid by cooling (using air or water from a cooling tower).

Why use an air condenser instead of a water condenser?

There are many advantages to choosing a water-cooled condenser. Some argue that they are more energy efficient than air-cooled condensers.This is because more efficient heat transferthereby saving energy costs and consumption.

Leave a Comment